Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Cut Tape (CT) |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Resistance |
100Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
250 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC74HC4051A |
Pin Count |
16 |
Polarity |
Non-Inverting |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Operating Supply Current |
40μA |
Power Dissipation |
500mW |
Propagation Delay |
40 ns |
Turn On Delay Time |
245 ns |
Logic Function |
Demultiplexer, Demux, Multiplexer, Mux |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
2V~6V ±2V~6V |
Halogen Free |
Halogen Free |
Supply Type |
Dual, Single |
Bandwidth |
80MHz |
Neg Supply Voltage-Nom (Vsup) |
-4.5V |
Turn-Off Delay Time |
160 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
100Ohm |
Min Dual Supply Voltage |
1V |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
40 dB |
Current - Leakage (IS(off)) (Max) |
200nA |
Channel Capacitance (CS(off), CD(off)) |
130pF |
On-state Resistance Match-Nom |
18Ohm |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
76ns |
Signal Current-Max |
0.025A |
Height Seated (Max) |
2.65mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC74HC4051ADWR2G Overview
This electronic part is conveniently packaged in 16-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. To ensure high reliability, a new packaging method Cut Tape (CT) is used. In Surface Mount, you'll find this switch device. 8:1 is the ratio between multiplexers and demultiplexers. Temperatures around -55°C~125°C TA are extended for operation. There are 16 terminations totally. As a result of its 8 channels, this electronic component provides high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. The electronic part body is injected with 16 pins. A 1 circuit is present in this switch device. Using the MC74HC4051A search parameter, you can discover variants of the switch. This digital multiplexer has 100Ohm internal resistance. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. This multiplexer would work with 40μA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. For dual power supplies, a voltage of at least 1V should be attached. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. The 8 inputs need to be operated in order to work. A 80MHz-bandwidth can be used for data transfer.
MC74HC4051ADWR2G Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74HC4051ADWR2G Applications
There are a lot of ON Semiconductor MC74HC4051ADWR2G Analog Switches & Multiplexers ICs applications.
- PDAs
- Microwave transmission systems
- ATM
- Access Concentrators
- Isolation
- New designs requiring multiplexer functions
- Medical Instrumentation
- Audio and video switching
- Precision instrumentation
- Ultrasound