MC74HC4051AFELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4051A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Throw Configuration | SP8T |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 245 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 160 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 130pF |
| On-state Resistance Match-Nom | 18Ohm |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 76ns |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 2.05mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74HC4051AFELG Overview
Packed in 16-SOIC (0.209, 5.30mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. 8:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -55°C~125°C TA. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 8 channels. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. Circuits number 1 make up this analogue multiplexer. Using the MC74HC4051A search parameter, you can discover variants of the switch. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. Please refer to the datasheets for 16 pins functions. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 6V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended that the electrical component receives a voltage of 2V. For this digital switch to work, 40μA current would suffice. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. You should attach at least 1V voltage if you are using dual power supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. A 8 input needs to be operated. There are 80MHz bandwidths for data transfer.
MC74HC4051AFELG Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74HC4051AFELG Applications
There are a lot of ON Semiconductor MC74HC4051AFELG Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- E1 Multiplexer
- Video signal routing
- High reliability control systems
- Fault Tolerant Systems
- PDAs
- Battery Powered Systems
- SONET
- Communication systems
- Automotive applications
