MC74HC4051ANG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 750mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4051A |
| Pin Count | 16 |
| Polarity | Non-Inverting |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 4μA |
| Power Dissipation | 750mW |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 245 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 80MHz |
| Breakdown Voltage | 160V |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 160 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 130pF |
| On-state Resistance Match-Nom | 18Ohm |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 76ns |
| Signal Current-Max | 0.025A |
| Height | 3.43mm |
| Length | 19.55mm |
| Width | 6.85mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74HC4051ANG Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Through Hole, this analog switch is mounted. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -55°C~125°C TA. In total, there are 16 terminations. By its 8 channels, the electronic component provides high-quality output. With a 4.5V voltage supply, the electrical component should be turned on and run. This electrical component is included in the 16 series of products. There are 1 circuits in this switch device. Search with MC74HC4051A if you are looking for analog multiplexer variants. Analog switches have 100Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In a normalsituation, users should not supply the switches with voltage higher than 6V. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage fed to the electronic component should be 2V. The analogue multiplexer could operate on 40μA current. For this switch, a dual supply voltage is feasible, but it must not exceed 6VIn the case of dual power supplies, you should connect at least 1V. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. The 8 inputs need to be operated in order to work. There are 80MHz bandwidths for data transfer.
MC74HC4051ANG Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74HC4051ANG Applications
There are a lot of ON Semiconductor MC74HC4051ANG Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Wireless Local Loop
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Sample-and-hold systems
- Isolation
- Intelligent PBX
- Battery Powered Systems
- RGB switches
- Battery-powered systems
- E1 Multiplexer
