MC74HC4052AD

SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE MC74HC4052A 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74HC4052AD
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 207
Description: SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE MC74HC4052A 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2003
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	100Ohm
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	4.5V
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MC74HC4052A
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	40μA
Throw Configuration	4PST
Propagation Delay	40 ns
Turn On Delay Time	245 ns
Logic Function	Demultiplexer, Multiplexer
Voltage - Supply, Single/Dual (±)	2V~6V ±2V~6V
Supply Type	Dual, Single
Bandwidth	95MHz
Supply Current-Max (Isup)	0.08mA
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	160 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	1V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	80pF
On-state Resistance Match-Nom	18Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	10 Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	83ns
Switch-off Time-Max	76ns
Height Seated (Max)	1.75mm
Length	9.9mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MC74HC4052AD Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -55°C~125°C TA. In total, there are 16 terminations. By its 4 channels, the electronic component provides high-quality output. With a 4.5V voltage supply, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. Based on SP4T switching circuits, these analog multiplexers work. A 2 circuit is present in this switch device. Try searching for the analog switch ic with MC74HC4052A if you are looking for variants. Analog switches have 100Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. A analog switch ic that has a cost-effective Dual, Single supply type. 2V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 40μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. A dual power supply should have at least 1V voltage attached. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. This switch operates within the bandwidth of 95MHz.