MC74HC4052ADR2G

SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE MC74HC4052A 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74HC4052ADR2G
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 724
Description: SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE MC74HC4052A 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	190Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MC74HC4052A
Pin Count	16
Polarity	Non-Inverting
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	40μA
Power Dissipation	500mW
Propagation Delay	40 ns
Turn On Delay Time	245 ns
Logic Function	Demultiplexer, Demux, Multiplexer, Mux
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~6V ±2V~6V
Halogen Free	Halogen Free
Supply Type	Dual, Single
Bandwidth	95MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	160 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	80pF
On-state Resistance Match-Nom	18Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	10 Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	76ns
Height Seated (Max)	1.75mm
Length	9.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MC74HC4052ADR2G Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Around -55°C~125°C TA is the extended operating temperature. There are 16 terminations totally. High-quality output is provided by the electronic component's 4 channels. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. A SP4T switching circuit is used to build these analog multiplexers. This multiplexer is composed of 2 circuits. Look for analog switch ic variants by searching with MC74HC4052A. Analog switches have 190Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 6V should not normally be supplied to the switches. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2V should be the lowest voltage fed to the electronic component. The analogue multiplexer could operate on 40μA current. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. If you are using a dual power supply, you should attach at least 1V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. A 8 input needs to be operated. The data can be transferred over a wide range of bandwidths, called 95MHz bandwidths.