MC74HC4052ADT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4052A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 40μA |
| Throw Configuration | 4PST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 245 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 95MHz |
| Supply Current-Max (Isup) | 0.08mA |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 160 ns |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 80pF |
| On-state Resistance Match-Nom | 18Ohm |
| Switch Circuit | SP4T |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 83ns |
| Switch-off Time-Max | 76ns |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC4052ADT Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Operation at a temperature around -55°C~125°C TA. There are 16 terminations totally. The electronic part delivers high-quality output through its 4 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. As part of the design of the 16 series, this electronic part has been incorporated into the system. The analog switch ics are built using SP4T switching circuits. The circuits in this analogue multiplexer number 2. If you are looking for variants of the digital switch, trying search with MC74HC4052A. This digital multiplexer has 100Ohm internal resistance. Please refer to the datasheets for 16 pins functions. The analog multiplexer shown here is a typical Multiplexer or Switches. Digital switch that provides Dual, Single power at a cost-effective price. This multiplexer would work with 40μA current. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. It can operate from 6V operating voltages. The transfer of data can be performed over 95MHz bandwidths.
MC74HC4052ADT Features
4 Channels
Switch Circuit: SP4T
40μA Supply Current
Bandwidth: 95MHz
MC74HC4052ADT Applications
There are a lot of ON Semiconductor MC74HC4052ADT Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- DSLAMs
- PDAs
- Digital cross connects (DSX-1)
- High reliability control systems
- ISDN NT1/TA
- Cell phones
- Ultrasound
- HDTV
- E1 Multiplexer
