banner_page

MC74HC4052ADW

SP4T 100Ohm DUAL Analog Switches 16 Pins 100nA 4.5V 16-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-MC74HC4052ADW
  • Package: 16-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 253
  • Description: SP4T 100Ohm DUAL Analog Switches 16 Pins 100nA 4.5V 16-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295, 7.50mm Width)
Surface Mount YES
Operating Temperature -55°C~125°C TA
Packaging Tube
JESD-609 Code e0
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
Terminal Finish TIN LEAD
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 4.5V
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 16
JESD-30 Code R-PDSO-G16
Qualification Status Not Qualified
Number of Channels 4
Number of Circuits 2
Analog IC - Other Type DIFFERENTIAL MULTIPLEXER
Voltage - Supply, Single/Dual (±) 2V~6V ±2V~6V
Neg Supply Voltage-Nom (Vsup) -4.5V
-3db Bandwidth 95MHz
On-State Resistance (Max) 100Ohm
Multiplexer/Demultiplexer Circuit 4:1
Off-state Isolation-Nom 40 dB
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 80pF
On-state Resistance Match-Nom 18Ohm
Switch Circuit SP4T
Channel-to-Channel Matching (ΔRon) 10 Ω
Crosstalk -60dB @ 1MHz
Switch-on Time-Max 83ns
Switch-off Time-Max 76ns
Length 10.3mm
RoHS Status Non-RoHS Compliant

MC74HC4052ADW Overview


Packed in 16-SOIC (0.295, 7.50mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 4:1. Operational temperature extended around -55°C~125°C TA. Total terminations are 16. As a result of its 4 channels, this electronic component provides high-quality output. With a 4.5V voltage supply, the electrical component should be turned on and run. The electrical component body receives 16 pins. A SP4T switching circuit is used to build these analog multiplexers. A total of 2 circuits make up this switch device. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs.

MC74HC4052ADW Features


4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 95MHz

MC74HC4052ADW Applications


There are a lot of Rochester Electronics, LLC MC74HC4052ADW Analog Switches & Multiplexers ICs applications.

  • PCMCIA cards
  • Audio signal routing
  • Remote wireless modules
  • ATM
  • High-Voltage
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • Digital cross connects (DSX-1)
  • USB 1.1 signal switching circuits
  • Avionics test equipment

Write a review

Note: HTML is not translated!
    Bad           Good