MC74HC4052ADW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC74HC4052A |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Throw Configuration | 4PST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 245 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 95MHz |
| Supply Current-Max (Isup) | 0.08mA |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 160 ns |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 80pF |
| On-state Resistance Match-Nom | 18Ohm |
| Switch Circuit | SP4T |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 83ns |
| Switch-off Time-Max | 76ns |
| Length | 10.3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC4052ADW Overview
As the electronic part is packed in 16-SOIC (0.295, 7.50mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. In Surface Mount, you'll find this switch device. 4:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -55°C~125°C TA. 16 terminations have been made so far. The electronic part delivers high-quality output through its 4 channels. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. Into the electrical component body are injected 16 pins. A SP4T switching circuit is used to build these analog multiplexers. There are 2 circuits in this switch device. Look for analog switch ic variants by searching with MC74HC4052A. As far as internal resistance is concerned, it has 100Ohm. There is Multiplexer or Switches analog multiplexer like this in the world. A analog switch ic that has a cost-effective Dual, Single supply type. It would be sufficient to run this analogue multiplexer with 40μA current. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board. This electrical part is compatible with 6V operating voltages. 95MHz-bandwidths can be used to transfer data between multiplexers.
MC74HC4052ADW Features
4 Channels
Switch Circuit: SP4T
40μA Supply Current
Bandwidth: 95MHz
MC74HC4052ADW Applications
There are a lot of ON Semiconductor MC74HC4052ADW Analog Switches & Multiplexers ICs applications.
- SONET/SDH ADM
- High speed data transmission line cards
- High-Voltage
- FTTH
- DSUs
- Power routing
- PBXs
- Communication systems
- DVD-R
- Audio and video signal routing
