MC74HC4052ADWG

SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE MC74HC4052A 16 Pins 100nA 4.5V 16-SOIC (0.295, 7.50mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74HC4052ADWG
Package: 16-SOIC (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 450
Description: SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE MC74HC4052A 16 Pins 100nA 4.5V 16-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Supply Voltage	4.5V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MC74HC4052A
Pin Count	16
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	40μA
Nominal Supply Current	80μA
Power Dissipation	500mW
Throw Configuration	4PST
Propagation Delay	40 ns
Turn On Delay Time	245 ns
Logic Function	Demultiplexer, Demux, Multiplexer, Mux
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~6V ±2V~6V
Halogen Free	Halogen Free
Supply Type	Dual, Single
Bandwidth	95MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	160 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	1V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	80pF
On-state Resistance Match-Nom	18Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	10 Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	76ns
Height	2.4mm
Length	10.45mm
Width	7.6mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.295, 7.50mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2007
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
Resistance	100Ohm
Terminal Finish	Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1

MC74HC4052ADWG Overview

Presented in 16-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. 16 terminations have been made so far. This electronic part offers high-quality output due to its 4 channels. With a 4.5V voltage supply, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. These analog multiplexers are built based on SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. Search with MC74HC4052A if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 100Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 6V. A analog switch ic that has a cost-effective Dual, Single supply type. There should be 2V voltage fed to the electrical part below 2V. For this multiplexer to operate, 40μA current would be sufficient. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 1V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. The electrical component supports 8 inputs. The data can be transferred over a wide range of bandwidths, called 95MHz bandwidths.