MC74HC4052AFG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4052A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 40μA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 245 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 95MHz |
| Supply Current-Max (Isup) | 0.08mA |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 160 ns |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 80pF |
| On-state Resistance Match-Nom | 18Ohm |
| Switch Circuit | SP4T |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 83ns |
| Switch-off Time-Max | 76ns |
| RoHS Status | RoHS Compliant |
MC74HC4052AFG Overview
As the electronic part is packed in 16-SOIC (0.209, 5.30mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Operation at a temperature around -55°C~125°C TA. In total, there are 16 terminations. The electronic part provides high-quality output because it has 4 channels. Turning on and running the electrical part should be easy with a 4.5V voltage supply. An injection of 16 pins is performed into the body of the electrical component. A SP4T switching circuit is used for these analog switches. A 2 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with MC74HC4052A. There is 100Ohm internal resistance in this digital multiplexer. The datasheets for the 16 pins explain the functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. Analog switch ics with Dual, Single supply type are cost-effective. It would be sufficient to run this analogue multiplexer with 40μA current. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. 6V operating voltages are supported by the electronic component. It is possible to transfer data over a 95MHz-bandwidth.
MC74HC4052AFG Features
4 Channels
Switch Circuit: SP4T
40μA Supply Current
Bandwidth: 95MHz
MC74HC4052AFG Applications
There are a lot of ON Semiconductor MC74HC4052AFG Analog Switches & Multiplexers ICs applications.
- RGB switches
- Fault Tolerant Systems
- Optical Applications
- DVD-R
- Automatic test equipment
- Central office
- Fiber to the Home
- Digital cross connects (DSX-1)
- Channel Banks
- New designs requiring multiplexer functions
