MC74HC4053ADR2G

SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74HC4053ADR2G
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 154
Description: SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	190Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	4.5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	74HC4053
Pin Count	16
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	40μA
Power Dissipation	500mW
Throw Configuration	DPST
Propagation Delay	40 ns
Turn On Delay Time	245 ns
Logic Function	Demultiplexer, Demux, Multiplexer, Mux
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	2V~6V ±2V~6V
Halogen Free	Halogen Free
Supply Type	Dual, Single
Bandwidth	120MHz
Supply Current-Max (Isup)	0.08mA
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	160 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	50pF
On-state Resistance Match-Nom	12Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	10 Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.025A
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MC74HC4053ADR2G Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Temperatures around -55°C~125°C TA are extended for operation. Total terminations are 16. The electronic part provides high-quality output because it has 2 channels. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Circuits based on SPDT switching are used to construct these analog switch ics. There are 3 circuits in this multiplexer. Search with 74HC4053 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 190Ohm. The functions of 16 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 6V to a switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. There should be 2V voltage fed to the electrical part below 2V. For this multiplexer to operate, 40μA current would be sufficient. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. A dual power supply should have at least 1V voltage attached. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. Operating 6 inputs is required. The data can be transferred over a wide range of bandwidths, called 120MHz bandwidths.