Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
100Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
450mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
4.5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
74HC4053 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
2 |
Number of Circuits |
3 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
40μA |
Power Dissipation |
450mW |
Throw Configuration |
DPST |
Propagation Delay |
40 ns |
Turn On Delay Time |
245 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
6 |
Voltage - Supply, Single/Dual (±) |
2V~6V ±2V~6V |
Supply Type |
Dual, Single |
Bandwidth |
120MHz |
Supply Current-Max (Isup) |
0.08mA |
Neg Supply Voltage-Nom (Vsup) |
-4.5V |
Turn-Off Delay Time |
160 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
100Ohm |
Min Dual Supply Voltage |
1V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
50pF |
On-state Resistance Match-Nom |
12Ohm |
Switch Circuit |
SPDT |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Crosstalk |
-60dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.025A |
Height Seated (Max) |
1.2mm |
Length |
5mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MC74HC4053ADT Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 2:1. Operating temperature extended to -55°C~125°C TA. In total, there are 16 terminations. Due to its 2 channels, the electrical component produces high-quality output. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. A SPDT switching circuit is used for these analog switches. There are 3 circuits in this multiplexer. Search with 74HC4053 if you are looking for analog multiplexer variants. This digital multiplexer has 100Ohm internal resistance. Datasheets for 16 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 6V should not normally be supplied to the switches. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2V. This digital switch can be operated with a current of 40μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. When using dual power supplies, you should attach at least 1V. Operating the 6 inputs requires 6 inputs. It is possible to transfer data over a 120MHz-bandwidth.
MC74HC4053ADT Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 120MHz
MC74HC4053ADT Applications
There are a lot of ON Semiconductor MC74HC4053ADT Analog Switches & Multiplexers ICs applications.
- Modems
- Fault Tolerant Systems
- Battery-powered systems
- PBX interfaces
- Residential Gateways, Home Gateway/Router
- DVD-R
- PCMCIA cards
- USB 1.1 signal switching circuits
- Audio and video signal routing
- Communications systems