Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.295, 7.50mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
100Ohm |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
3 |
Supply Voltage |
4.5V |
Terminal Pitch |
1.27mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74HC4053 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
2 |
Number of Circuits |
3 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Operating Supply Current |
40μA |
Power Dissipation |
500mW |
Throw Configuration |
DPST |
Propagation Delay |
40 ns |
Turn On Delay Time |
245 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
6 |
Voltage - Supply, Single/Dual (±) |
2V~6V ±2V~6V |
Supply Type |
Dual, Single |
Bandwidth |
120MHz |
Supply Current-Max (Isup) |
0.08mA |
Neg Supply Voltage-Nom (Vsup) |
-4.5V |
Turn-Off Delay Time |
160 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
100Ohm |
Min Dual Supply Voltage |
1V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
50pF |
On-state Resistance Match-Nom |
12Ohm |
Switch Circuit |
SPDT |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Crosstalk |
-60dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.025A |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MC74HC4053ADW Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.295, 7.50mm Width). In order to provide high reliability, an advanced packaging method Tube is used. It is mounted in the position Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -55°C~125°C TA. In total, there are 16 terminations. By its 2 channels, the electronic component provides high-quality output. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the body of the electronic part. Multiplexers built on a SPDT switching circuit are built. The multiplexer consists of 3 circuits. Use 74HC4053 to search for variants of the digital switches. In this multiplexer, the internal resistance is 100Ohm. The functions of 16 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. Dual, Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 2V. For this multiplexer to operate, 40μA current would be sufficient. Despite this switch's dual supply capability, its voltage should not exceed 6V. The voltage should be at least 1V if you are using dual power supplies. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. Among the inputs that can be operated are the 6 inputs. There are various bandwidths available for data transfer.
MC74HC4053ADW Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 120MHz
MC74HC4053ADW Applications
There are a lot of ON Semiconductor MC74HC4053ADW Analog Switches & Multiplexers ICs applications.
- Microwave transmission systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- SONET
- Digital access cross connects
- Remote Powered Equipment
- Audio and video switching
- Video signal routing
- Power routing
- Modems
- Routers