MC74HC4053ADWG

SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.295, 7.50mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74HC4053ADWG
Package: 16-SOIC (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 354
Description: SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.295, 7.50mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2007
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
Resistance	190Ohm
Terminal Finish	Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	250
Number of Functions	3
Supply Voltage	4.5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	74HC4053
Pin Count	16
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	40μA
Nominal Supply Current	4μA
Power Dissipation	500mW
Throw Configuration	DPST
Propagation Delay	40 ns
Turn On Delay Time	245 ns
Logic Function	Demultiplexer, Demux, Multiplexer, Mux
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	2V~6V ±2V~6V
Halogen Free	Halogen Free
Supply Type	Dual, Single
Bandwidth	120MHz
Supply Current-Max (Isup)	0.08mA
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	160 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	1V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	50pF
On-state Resistance Match-Nom	12Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	10 Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.025A
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MC74HC4053ADWG Overview

As the electronic part is packed in 16-SOIC (0.295, 7.50mm Width), international shipping is convenient. Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -55°C~125°C TA are extended for operation. In total, 16 terminations have occurred. High-quality output is provided by the electronic component's 2 channels. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. The analog switch ics are built using SPDT switching circuits. A total of 3 circuits make up this switch device. Search with 74HC4053 if you are looking for analog multiplexer variants. A 190Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 16 pins functions. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Analog switch ics with Dual, Single supply type are cost-effective. It is recommended to use 2V as the lowest voltage for the electrical part. For this digital switch to work, 40μA current would suffice. Despite this switch's dual supply capability, its voltage should not exceed 6V. It is recommended that you attach at least 1V to your dual power supply. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. A 6 input needs to be operated. There are 120MHz bandwidths for data transfer.