MC74HC4053ADWR2G

SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.295, 7.50mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74HC4053ADWR2G
Package: 16-SOIC (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 460
Description: SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.295, 7.50mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
Resistance	100Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	250
Number of Functions	3
Supply Voltage	4.5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	74HC4053
Pin Count	16
Polarity	Non-Inverting
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	40μA
Power Dissipation	500mW
Propagation Delay	75 ns
Turn On Delay Time	245 ns
Logic Function	Demultiplexer, Demux, Multiplexer, Mux
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	2V~6V ±2V~6V
Halogen Free	Halogen Free
Supply Type	Dual, Single
Bandwidth	120MHz
Supply Current-Max (Isup)	0.08mA
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	160 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	50pF
On-state Resistance Match-Nom	12Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	10 Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.025A
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MC74HC4053ADWR2G Overview

Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.295, 7.50mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. The total number of terminations is 16. High-quality output is provided by the electronic component's 2 channels. When the electronic component is given a voltage of 4.5V, it should be turned on and run. The electrical component body receives 16 pins. A SPDT switching circuit is used to build these analog multiplexers. Circuits number 3 make up this analogue multiplexer. Try searching with 74HC4053 to find analog multiplexer variants. There is 100Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 6V in normal situations. The digital multiplexer has a low cost Dual, Single supply. It is recommended that the electrical component receives a voltage of 2V. 40μA current would be enough for this multiplexer to operate. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. In the case of dual power supplies, you should connect at least 1V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. Operating 6 inputs is required. It is possible to transfer data over a 120MHz-bandwidth.