MC74HC4053AF

SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.209, 5.30mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74HC4053AF
Package: 16-SOIC (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 833
Description: SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2005
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
Resistance	100Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	3
Supply Voltage	4.5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74HC4053
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	40μA
Power Dissipation	500mW
Throw Configuration	DPST
Propagation Delay	40 ns
Turn On Delay Time	245 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	2V~6V ±2V~6V
Supply Type	Dual, Single
Bandwidth	120MHz
Supply Current-Max (Isup)	0.08mA
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	160 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	1V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	50pF
On-state Resistance Match-Nom	12Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	10 Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.025A
Height Seated (Max)	2.05mm
Length	10.2mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MC74HC4053AF Overview

As the electronic part is packed in 16-SOIC (0.209, 5.30mm Width), international shipping is convenient. The advanced packaging method Tube provides high reliability. Surface Mount is where this multiplexer is located. 2:1 is the ratio between multiplexers and demultiplexers. Temperatures around -55°C~125°C TA are extended for operation. 16 terminations have been made so far. A electrical component with 2 channels is capable of high-quality output. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. There are 16 pins injected into the electronic part body. These analog multiplexers are built based on SPDT switching circuits. Circuits number 3 make up this analogue multiplexer. 74HC4053 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 100Ohm. To find out what the 16 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended that the electrical component receives a voltage of 2V. The switch device would be able to operate with 40μA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. The voltage should be at least 1V if you are using dual power supplies. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. Operating the 6 inputs requires 6 inputs. It is possible to transfer data over a 120MHz-bandwidth.