MC74HC4053AFEL
| Parameters | |
|---|---|
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 50pF |
| On-state Resistance Match-Nom | 12Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC4053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Throw Configuration | DPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 245 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 120MHz |
| Supply Current-Max (Isup) | 0.08mA |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 160 ns |
| On-State Resistance (Max) | 100Ohm |
MC74HC4053AFEL Overview
Presented in 16-SOIC (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature around -55°C~125°C TA extended. A total of 16 terminations have been recorded. This electronic part offers high-quality output due to its 2 channels. A 4.5V voltage supply should turn on and run the electronic component. It is part of the design of the 16 series that this electronic component is included. Based on SPDT switching circuits, these analog multiplexers work. There are 3 circuits in this switch device. If you are looking for variants of the digital switch, trying search with 74HC4053. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. The datasheets for the 16 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. The analog switch ic is of the Dual, Single supply type and is cost-effective. 40μA current would be enough for this multiplexer to operate. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. There is a voltage range of 6V operating voltages for the electrical part. 120MHz bandwidths enable data to be transferred.
MC74HC4053AFEL Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 120MHz
MC74HC4053AFEL Applications
There are a lot of ON Semiconductor MC74HC4053AFEL Analog Switches & Multiplexers ICs applications.
- Power routing
- Data Acquisition Systems
- Precision data acquisition
- Wireless Local Loop
- Video switching
- Frame Relay Equipment
- Battery Powered Instruments
- Precision instrumentation
- MP3 players
- Digital Cross-Connects
