MC74HC4053AFG

SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.209, 5.30mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74HC4053AFG
Package: 16-SOIC (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 630
Description: SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Operating Supply Current	40μA
Power Dissipation	500mW
Throw Configuration	DPST
Propagation Delay	40 ns
Turn On Delay Time	245 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	2V~6V ±2V~6V
Supply Type	Dual, Single
Bandwidth	120MHz
Supply Current-Max (Isup)	0.08mA
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	160 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	1V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	50pF
On-state Resistance Match-Nom	12Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	10 Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.025A
Height Seated (Max)	2.05mm
Length	10.2mm
RoHS Status	RoHS Compliant
Lead Free	Lead Free
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2012
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
Resistance	100Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	4.5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	74HC4053
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER

MC74HC4053AFG Overview

Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.209, 5.30mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 2:1. Operation at a temperature around -55°C~125°C TA. A total of 16 terminations have been recorded. The electronic part provides high-quality output because it has 2 channels. Turning on and running the electrical part should be easy with a 4.5V voltage supply. This electronic part can be found in the 16 series. A SPDT switching circuit is used to build these analog multiplexers. 3 circuits are used in this analogue multiplexer. Try searching with 74HC4053 if you're looking for variants. This digital multiplexer has 100Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 6V volts for the multiplexer. A analog switch ic that has a cost-effective Dual, Single supply type. 2V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 40μA current. Despite this switch's dual supply capability, its voltage should not exceed 6V. You should attach at least 1V voltage if you are using dual power supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. There are 6 inputs to be operated. This switch operates within the bandwidth of 120MHz.