MC74HC4053AN

SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-DIP (0.300, 7.62mm)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74HC4053AN
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 264
Description: SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2005
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	100Ohm
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Multiplexer or Switches
Max Power Dissipation	750mW
Technology	CMOS
Peak Reflow Temperature (Cel)	235
Number of Functions	3
Supply Voltage	4.5V
Terminal Pitch	2.54mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74HC4053
Pin Count	16
Qualification Status	Not Qualified
Polarity	Non-Inverting
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	40μA
Power Dissipation	750mW
Propagation Delay	40 ns
Turn On Delay Time	245 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	2V~6V ±2V~6V
Supply Type	Dual, Single
Bandwidth	120MHz
Supply Current-Max (Isup)	0.08mA
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	160 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	1V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	50pF
On-state Resistance Match-Nom	12Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	10 Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.025A
Height Seated (Max)	4.44mm
Length	19.175mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MC74HC4053AN Overview

This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. The multiplexer is located in Through Hole. 2:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -55°C~125°C TA. Total terminations are 16. Due to its 2 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 4.5V voltage supply. There is an electrical component included in the 16 series. The analog switch ics are built using SPDT switching circuits. Circuits number 3 make up this analogue multiplexer. 74HC4053 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 100Ohm. The functions of 16 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 6V to a switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 2V. The analogue multiplexer could operate on 40μA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. For dual power supplies, a voltage of at least 1V should be attached. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. The 6 inputs need to be operated in order to work. A 120MHz-bandwidth can be used for data transfer.