MC74HC4053ANG

SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-DIP (0.300, 7.62mm)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74HC4053ANG
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 457
Description: SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Bandwidth	120MHz
Supply Current-Max (Isup)	0.08mA
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	160 ns
Max Dual Supply Voltage	6V
Number of Gates	1
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	1V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	50pF
On-state Resistance Match-Nom	12Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	10 Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.025A
Height Seated (Max)	4.44mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	RoHS Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	1997
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	100Ohm
Terminal Finish	Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	750mW
Technology	CMOS
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	4.5V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	74HC4053
Pin Count	16
Polarity	Non-Inverting
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	40μA
Nominal Supply Current	4μA
Power Dissipation	750mW
Propagation Delay	40 ns
Turn On Delay Time	245 ns
Logic Function	Demultiplexer, Demux, Multiplexer, Mux
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	2V~6V ±2V~6V
Supply Type	Dual, Single

MC74HC4053ANG Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). High reliability is ensured by the advanced packaging method Tube. This analog switch is mounted in Through Hole. Multiplexer and demultiplexer circuits have a number 2:1. Operation at a temperature around -55°C~125°C TA. A total of 16 terminations have been recorded. A electrical component with 2 channels is capable of high-quality output. When the electronic component is given a voltage of 4.5V, it should be turned on and run. A total of 16 pins are injected into the electrical part body. A SPDT switching circuit is used to build these analog multiplexers. The circuits in this analogue multiplexer number 3. Try searching with 74HC4053 to find analog multiplexer variants. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 6V should not normally be supplied to the switches. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage fed to the electronic component should be 2V. The switch device would be able to operate with 40μA current. There is no problem with using dual supply voltage, but it should not exceed 6V. It is recommended that you attach at least 1V to your dual power supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. Operating the 6 inputs requires 6 inputs. 120MHz bandwidths enable data to be transferred.