MC74HC4060ADT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC4060 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 200 ns |
| Turn On Delay Time | 1 μs |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| Number of Input Lines | 1 |
| Number of Output Lines | 10 |
| fmax-Min | 40 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 25000000Hz |
| Count Rate | 50MHz |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC4060ADT Overview
A 16-TSSOP (0.173, 4.40mm Width)package is used for this device. There are 16terminations used for configuring it. The supply voltage of 3V enables it operate in a fully flexible way. In total, there are 16pins on the component. In this case, it is packaged as Tube. In the circuit, there are 16pins that connect other components. The device is mounted in the direction of [0]. The HC/UHfamily includes it. The 74HCseries offers a wide range of applications due to its versatility. It is decided to use the logic type [0]. -55°C~125°Cshould be set as the operating temperature. It adopts a mounting type of Surface Mount. In the presence of the supply voltage of [0], it can operate more reliably. An array consists of 14bits for each element. Among its base part number [0], you will find additional parts that are related. It is packed with [0]. Voltage from the voltage source is [0]. The minimum supply voltage (Vsup) is as low as 2V. Depending on the device type, the maximum supply voltage (Vsup) can be up to 6V volts. A total of 1lines are used for inputting binary data. It is equipped with 10 output lines.
MC74HC4060ADT Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
14 bits per element
MC74HC4060ADT Applications
There are a lot of ON Semiconductor MC74HC4060ADT Counters & Dividers applications.
- DIVISION
- Divide-by"N" counters/frequency synthesizers
- Fixed and programmable counters greater than 10
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Digital multiplexing and demultiplexing
- Time-delay circuits
- Dual Up Counters
- Communications Digital Frequency Synthesizers;
- Timing applications
- Programmable binary and decade
