MC74HC4060ADTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC4060 |
| Pin Count | 16 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 200 ns |
| Turn On Delay Time | 1 μs |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Halogen Free | Halogen Free |
| Logic Type | Binary Counter |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| Number of Input Lines | 1 |
| Number of Output Lines | 10 |
| fmax-Min | 40 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 25000000Hz |
| Count Rate | 50MHz |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC4060ADTG Overview
This device is packaged in a 16-TSSOP (0.173, 4.40mm Width) package. In order to configure it, it uses 16terminations. Having a voltage supply of 3Vallows it to operate in a highly flexible manner. A total of 16pins are available on all components. As [0], it is packaged. There are 16 pins going on to connect other parts in the circuit. It is mounted in the manner of [0]. In this case, it emerges as a member of the HC/UH family. As a member of 74HC series, it is well suited for various applications. Binary Counteris adopted as the logic type. In this case, the operating temperature should be set to -55°C~125°C. Having a mounting type of [0], it is suitable for installation. Providing a voltage of 2V~6Vensures higher reliability of operation. The array has 14elements. As far as Pbfree code is concerned, the result may be yes. Further related parts may be found under the base part number 74HC4060. It is packed by [0]. There is 2/6V voltage comes from the voltage source. The minimum supply voltage (Vsup) is 2V. It is possible to supply voltages up to 6V volts (Vsup). There are 1 input lines for the input of binary data in the form of on/off signals. It has 10 output lines.
MC74HC4060ADTG Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
14 bits per element
MC74HC4060ADTG Applications
There are a lot of ON Semiconductor MC74HC4060ADTG Counters & Dividers applications.
- Divide-by-N counting
- Clocks
- Counter control/timers
- TRUE RMS-TO-DC CONVERSION
- ALGEBRAIC COMPUTATION
- Timing applications
- Analog multiplexing and demultiplexing
- POWER COMPUTATION
- Frequency division
- SQUARE ROOT
