MC74HC4066AFEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Resistance | 100Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4066A |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 80 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 4 |
| Supply Type | Dual |
| Bandwidth | 160MHz |
| Turn-Off Delay Time | 80 ns |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 20Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-off Time-Max | 60ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Normal Position | NO |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC4066AFEL Overview
This electronic part is conveniently packaged in 14-SOIC (0.209, 5.30mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. Total terminations are 14. A high-quality output is provided by the electrical component's 1 channels. A 3V voltage supply should turn on and run the electronic component. 14 pins are injected to the electronic part body. Circuits based on SPST - NO switching are used to construct these analog switch ics. Try searching with MC74HC4066A to find analog multiplexer variants. It has an internal resistance of 100Ohm. For details about the functions of 14 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. Analog switch ics with Dual supply type are cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. 40μA current would be enough for this multiplexer to operate. Using a single voltage supply, this switch device consumes 2V~12V volts. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. The 4 inputs need to be operated in order to work. This switch operates within the bandwidth of 160MHz.
MC74HC4066AFEL Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
Bandwidth: 160MHz
MC74HC4066AFEL Applications
There are a lot of ON Semiconductor MC74HC4066AFEL Analog Switches & Multiplexers ICs applications.
- Routers
- High speed data transmission line cards
- Industrial control systems
- DSUs
- Residential Gateways, Home Gateway/Router
- MP3 players
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Avionics and Military Systems
- Data switching
- Digital Cross-Connects
