Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.209, 5.30mm Width) |
Number of Pins |
14 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
14 |
Resistance |
100Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC74HC4066A |
Output |
SEPARATE OUTPUT |
Pin Count |
14 |
Number of Channels |
1 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2V |
Operating Supply Current |
40μA |
Power Dissipation |
500mW |
Throw Configuration |
SPST |
Propagation Delay |
40 ns |
Turn On Delay Time |
80 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
4 |
Supply Type |
Dual |
Bandwidth |
160MHz |
Turn-Off Delay Time |
80 ns |
On-State Resistance (Max) |
70Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
40 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
20Ohm |
Switch Circuit |
SPST - NO |
Channel-to-Channel Matching (ΔRon) |
15 Ω |
Crosstalk |
-80dB @ 1MHz |
Switching |
MAKE-BEFORE-BREAK |
Switch-off Time-Max |
60ns |
Voltage - Supply, Single (V+) |
2V~12V |
Normal Position |
NO |
Height Seated (Max) |
2.05mm |
Length |
10.2mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
MC74HC4066AFELG Overview
The electronic component is convenient to ship overseas because it is packed in a 14-SOIC (0.209, 5.30mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 1:1. Extended operating temperature around -55°C~125°C TA. In total, there have been 14 terminations. A 1 channel electronic part produces high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. It is injected into the electrical part body with 14 pins. Unlike digital switches, these are based on SPST - NO switching circuits. MC74HC4066A can be used to search for analog multiplexer variants. A 100Ohm internal resistance characterizes this multiplexer. To find out what the 14 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 12V to a switch device. Analogue multiplexer with a Dual supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 2V. An operating current of 40μA would be sufficient for this switch device. Analogue multiplexers require a 2V~12V voltage to drain from a single voltage supply. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The electrical component supports 4 inputs. The data can be transferred over a wide range of bandwidths, called 160MHz bandwidths.
MC74HC4066AFELG Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
Bandwidth: 160MHz
MC74HC4066AFELG Applications
There are a lot of ON Semiconductor MC74HC4066AFELG Analog Switches & Multiplexers ICs applications.
- Fault Tolerant Systems
- Medical systems
- Video signal routing
- Communication systems
- Avionics
- MP3 players
- Multiplexers
- Imaging
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Intelligent PBX