MC74HC4066AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 750mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC74HC4066A |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Operating Supply Current | 40μA |
| Throw Configuration | SPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 80 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual |
| Bandwidth | 160MHz |
| Turn-Off Delay Time | 80 ns |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 20Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-off Time-Max | 60ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Normal Position | NO |
| Length | 18.86mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC4066AN Overview
The electronic component is convenient to ship overseas because it is packed in a 14-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature around -55°C~125°C TA extended. Total terminations are 14. This electronic part offers high-quality output due to its 4 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. As part of its design, the 14 series is equipped with this electronic component. These analog multiplexers are built based on SPST - NO switching circuits. Try searching for the analog switch ic with MC74HC4066A if you are looking for variants. Analog switches have 100Ohm internal resistance. You can find the functions of the 14 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. The digital multiplexer has a low cost Dual supply. This digital switch can be operated with a current of 40μA. Analogue multiplexers require a 2V~12V voltage to drain from a single voltage supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. 12V operating voltages are supported by the electronic component. 160MHz-bandwidths can be used to transfer data between multiplexers.
MC74HC4066AN Features
4 Channels
Switch Circuit: SPST - NO
40μA Supply Current
Bandwidth: 160MHz
MC74HC4066AN Applications
There are a lot of ON Semiconductor MC74HC4066AN Analog Switches & Multiplexers ICs applications.
- Data switching
- Central office
- Precision data acquisition
- Digital Cross-Connects
- SDH/SONET multiplexers
- Microwave transmission systems
- Relay replacements
- Fiber to the Home
- Microprocessor controlled systems
- Voice over IP/DSL – Integrated Access Devices, Smart
