MC74HC4066ANG

SPST - NO 70Ohm Analog Switches MAKE-BEFORE-BREAK MC74HC4066A 14 Pins 100nA 3V 14-DIP (0.300, 7.62mm)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74HC4066ANG
Package: 14-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 726
Description: SPST - NO 70Ohm Analog Switches MAKE-BEFORE-BREAK MC74HC4066A 14 Pins 100nA 3V 14-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Number of Pins	14
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	100Ohm
Terminal Finish	Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	750mW
Technology	CMOS
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MC74HC4066A
Output	SEPARATE OUTPUT
Pin Count	14
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	40μA
Power Dissipation	750mW
Throw Configuration	SPST
Propagation Delay	40 ns
Turn On Delay Time	80 ns
Logic Function	Counter, Demultiplexer, Multiplexer
Number of Inputs	4
Supply Type	Dual
Bandwidth	160MHz
Turn-Off Delay Time	80 ns
On-State Resistance (Max)	70Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	20Ohm
Switch Circuit	SPST - NO
Channel-to-Channel Matching (ΔRon)	15 Ω
Crosstalk	-80dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-off Time-Max	60ns
Voltage - Supply, Single (V+)	2V~12V
Normal Position	NO
Length	18.86mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

MC74HC4066ANG Overview

As the electronic part is packed in 14-DIP (0.300, 7.62mm), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. 1:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -55°C~125°C TA degrees Celsius. Total terminations are 14. The electronic part provides high-quality output because it has 1 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. The electrical component body receives 14 pins. A SPST - NO switching circuit is used to build these analog multiplexers. Search with MC74HC4066A if you are looking for analog multiplexer variants. It has an internal resistance of 100Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 12V to a switch device. Dual supply type digital switch with a low cost. It is recommended to use 2V as the lowest voltage for the electrical part. For this multiplexer to operate, 40μA current would be sufficient. Using a single voltage supply, this switch device consumes 2V~12V volts. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. There are 4 inputs to be operated. A 160MHz-bandwidth can be used for data transfer.