Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
24 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Published |
2010 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Resistance |
140Ohm |
Terminal Finish |
Nickel/Gold/Palladium (Ni/Au/Pd) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
4 |
Supply Voltage |
4.5V |
Terminal Pitch |
0.65mm |
Pin Count |
24 |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Analog IC - Other Type |
SPST |
Halogen Free |
Halogen Free |
Supply Current-Max (Isup) |
0.08mA |
-3db Bandwidth |
90MHz |
On-State Resistance (Max) |
140Ohm |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
65 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
10Ohm |
Switch Circuit |
SP4T |
Channel-to-Channel Matching (ΔRon) |
8.5 Ω |
Crosstalk |
-80dB @ 1MHz |
Switch-on Time-Max |
23ns |
Voltage - Supply, Single (V+) |
2V~6V |
Signal Current-Max |
0.025A |
Length |
7.8mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC74HC4067ADTG Overview
Packed in 24-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tube. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 4:1. Operation at a temperature around -55°C~125°C TA. The total number of terminations is 24. As a result of its 1 channels, this electronic component provides high-quality output. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. There are 24 pins injected into the electronic part body. Unlike digital switches, these are based on SP4T switching circuits. The circuits in this analogue multiplexer number 1. In this multiplexer, the internal resistance is 140Ohm. To find out what the functions of 24 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. There should be 2V voltage fed to the electrical part below 2V. Analogue multiplexers require a 2V~6V voltage to drain from a single voltage supply. It is integrated with SPST analog ICs.
MC74HC4067ADTG Features
1 Channels
Switch Circuit: SP4T
-3db Bandwidth: 90MHz
MC74HC4067ADTG Applications
There are a lot of ON Semiconductor MC74HC4067ADTG Analog Switches & Multiplexers ICs applications.
- Avionics
- Public switching systems
- Transmit
- Multi-Line E1 Interface Cards
- Industrial control systems
- Low-Voltage
- PCMCIA cards
- Industrial
- Medical systems
- Communication systems