MC74HC4067ADTR2G
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 140Ohm |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SPST |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.08mA |
| -3db Bandwidth | 90MHz |
| On-State Resistance (Max) | 140Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Circuit | SP4T |
| Channel-to-Channel Matching (ΔRon) | 8.5 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switch-on Time-Max | 23ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.025A |
| Length | 7.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
MC74HC4067ADTR2G Overview
This electronic part is conveniently packaged in 24-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -55°C~125°C TA. There are 24 terminations totally. A high-quality output is provided by the electrical component's 1 channels. A 4.5V voltage supply should turn on and run the electronic component. There are 24 pins injected into the electronic part body. A SP4T switching circuit is used to build these analog multiplexers. Circuits number 1 make up this analogue multiplexer. It has an internal resistance of 140Ohm. For details about the functions of 24 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. 2V is the lowest voltage that should be fed to the electronic electronic part. The voltage required by this switch device is 2V~6V, draining from a single voltage supply. An analog IC with the number SPST is integrated into this board.
MC74HC4067ADTR2G Features
1 Channels
Switch Circuit: SP4T
-3db Bandwidth: 90MHz
MC74HC4067ADTR2G Applications
There are a lot of ON Semiconductor MC74HC4067ADTR2G Analog Switches & Multiplexers ICs applications.
- Cross Connects
- Medical Instrumentation
- Video signal routing
- T1/E1 Terminals
- HDTV
- Battery Powered Systems
- Optical Applications
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Industrial
- Audio and video signal routing
