banner_page

MC74HC4067ADWG

SP4T 140Ohm DUAL Analog Switches MC74HC4067A 24 Pins 100nA 4.5V 24-SOIC (0.295, 7.50mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC74HC4067ADWG
  • Package: 24-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 455
  • Description: SP4T 140Ohm DUAL Analog Switches MC74HC4067A 24 Pins 100nA 4.5V 24-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-SOIC (0.295, 7.50mm Width)
Number of Pins 24
Operating Temperature -55°C~125°C TA
Packaging Tube
Published 2010
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 24
Resistance 140Ohm
Terminal Finish Tin (Sn)
Subcategory Multiplexer or Switches
Max Power Dissipation 500mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 4
Supply Voltage 4.5V
Base Part Number MC74HC4067A
Pin Count 24
Number of Channels 1
Number of Circuits 1
Max Supply Voltage 6V
Min Supply Voltage 2V
Analog IC - Other Type SPST
Operating Supply Current 4μA
Nominal Supply Current 25mA
Power Dissipation 500mW
Turn On Delay Time 415 ns
Logic Function Demultiplexer, Multiplexer
Number of Inputs 4
Halogen Free Halogen Free
Supply Type Single
Supply Current-Max (Isup) 0.08mA
Turn-Off Delay Time 415 ns
-3db Bandwidth 90MHz
On-State Resistance (Max) 140Ohm
Multiplexer/Demultiplexer Circuit 4:1
Off-state Isolation-Nom 65 dB
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 10pF
On-state Resistance Match-Nom 10Ohm
Switch Circuit SP4T
Channel-to-Channel Matching (ΔRon) 8.5 Ω
Crosstalk -80dB @ 1MHz
Switch-on Time-Max 23ns
Voltage - Supply, Single (V+) 2V~6V
Signal Current-Max 0.025A
Height 2.36mm
Length 10.3mm
Width 7.6mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

MC74HC4067ADWG Overview


Presented in 24-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tube is used. Surface Mount is where this multiplexer is located. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -55°C~125°C TA. There are 24 terminations totally. The electronic part provides high-quality output because it has 1 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. It is injected into the electrical part body with 24 pins. A SP4T switching circuit is used for these analog switches. Circuits number 1 make up this analogue multiplexer. Try searching for the analog switch ic with MC74HC4067A if you are looking for variants. This digital multiplexer has 140Ohm internal resistance. The datasheets for the 24 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 6V. Digital switch that provides Single power at a cost-effective price. 2V is the lowest voltage the electrical component should receive. This multiplexer would work with 4μA current. Draining from a single voltage supply, this analog switch requires a voltage of 2V~6V. Integrated with SPST analog IC. There are 4 inputs to be operated.

MC74HC4067ADWG Features


1 Channels
Switch Circuit: SP4T
4μA Supply Current
-3db Bandwidth: 90MHz

MC74HC4067ADWG Applications


There are a lot of ON Semiconductor MC74HC4067ADWG Analog Switches & Multiplexers ICs applications.

  • Private Branch Exchange (PBX)
  • Cable Modem
  • Frame Relay Equipment
  • High reliability control systems
  • Access Concentrators
  • SONET
  • Power routing
  • Microprocessor controlled systems
  • Isolation
  • Precision test equipment

Write a review

Note: HTML is not translated!
    Bad           Good