Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.209, 5.30mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Resistance |
130Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexers or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
4.5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC74HC4316A |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
40μA |
Power Dissipation |
500mW |
Throw Configuration |
SPST |
Propagation Delay |
40 ns |
Turn On Delay Time |
130 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
2V~6V ±2V~6V |
Supply Type |
Dual |
Bandwidth |
150MHz |
Neg Supply Voltage-Nom (Vsup) |
-4.5V |
Turn-Off Delay Time |
130 ns |
Max Dual Supply Voltage |
6V |
-3db Bandwidth |
160MHz |
On-State Resistance (Max) |
90Ohm |
Min Dual Supply Voltage |
1V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
40 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
25Ohm |
Switch Circuit |
SPST - NO/NC |
Channel-to-Channel Matching (ΔRon) |
15 Ω |
Crosstalk |
-80dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
60ns |
Switch-off Time-Max |
60ns |
Normal Position |
NO |
Height Seated (Max) |
2.05mm |
Length |
10.2mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
MC74HC4316AFELG Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.209, 5.30mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -55°C~125°C TA extended. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 1 channels. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. There is an electrical component included in the 16 series. The analog switch ics are built using SPST - NO/NC switching circuits. Try searching for MC74HC4316A variants of the analog switch ic. Analog switches have 130Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. There is Multiplexers or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual supply. In order for the electronic part to function properly, the lowest voltage should be 2V. It would be sufficient to run this analogue multiplexer with 40μA current. Despite this switch device's dual supply capability, its voltage should not exceed 6V. If you are using dual power supplies, you should attach at least 1V. There are SEPARATE OUTPUT outputs on this analog switch ic. The 4 inputs need to be operated in order to work. There are various bandwidths available for data transfer.
MC74HC4316AFELG Features
1 Channels
Switch Circuit: SPST - NO/NC
40μA Supply Current
-3db Bandwidth: 160MHz
Bandwidth: 150MHz
MC74HC4316AFELG Applications
There are a lot of ON Semiconductor MC74HC4316AFELG Analog Switches & Multiplexers ICs applications.
- Optical Applications
- New designs requiring multiplexer functions
- Communication systems
- PDAs
- RGB switches
- SDH/SONET multiplexers
- USB 1.1 signal switching circuits
- PDH Multiplexers
- HDTV
- Video switching