MC74HC4316AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 130Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 750mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC74HC4316A |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Operating Supply Current | 40μA |
| Throw Configuration | SPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 140 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual |
| Bandwidth | 150MHz |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 130 ns |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 90Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPST - NO/NC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 60ns |
| Normal Position | NO |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC4316AN Overview
The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. The advanced packaging method Tube provides high reliability. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have the same number of circuits 1:1. Around -55°C~125°C TA is the extended operating temperature. Total terminations are 16. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 16 series. Based on SPST - NO/NC switching circuits, these analog multiplexers work. Circuits number 4 make up this analogue multiplexer. Search with MC74HC4316A if you are looking for analog multiplexer variants. Analog switches have 130Ohm internal resistance. Datasheets for functions of 16 pins are available. It is a typical Multiplexer or Switches analog multiplexer. The analog switch ic is of the Dual supply type and is cost-effective. For this multiplexer to operate, 40μA current would be sufficient. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. A voltage of 6V can be used to operate the electronic component. 150MHz-bandwidths can be used to transfer data between multiplexers.
MC74HC4316AN Features
1 Channels
Switch Circuit: SPST - NO/NC
40μA Supply Current
-3db Bandwidth: 160MHz
Bandwidth: 150MHz
MC74HC4316AN Applications
There are a lot of ON Semiconductor MC74HC4316AN Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Routers
- Avionics test equipment
- Avionics
- E1 Network Equipment
- Digital access cross connects
- Data switching
- Channel Banks
- Automotive applications
- Industrial and process control systems
