MC74HC4316ANG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 130Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexers or Switches |
| Max Power Dissipation | 750mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4316A |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Power Dissipation | 750mW |
| Throw Configuration | SPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 130 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual |
| Bandwidth | 160MHz |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 130 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 90Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPST - NO/NC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 60ns |
| Normal Position | NO |
| Length | 19.175mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74HC4316ANG Overview
This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature extended to -55°C~125°C TA. Total terminations are 16. A 1 channel electronic part produces high-quality output. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. 16 pins are injected to the electronic part body. A SPST - NO/NC switching circuit is used to build these analog multiplexers. Look for analog switch ic variants by searching with MC74HC4316A. A 130Ohm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. Multiplexers or Switches is a typical switch device. In normalcircumstances, users should not exceed 6V volts for the multiplexer. An effective Dual supply digital multiplexer. The lowest voltage fed to the electronic component should be 2V. It would be sufficient to run this analogue multiplexer with 40μA current. Despite this switch device's dual supply capability, its voltage should not exceed 6V. It is recommended that you attach at least 1V to your dual power supply. There are SEPARATE OUTPUT outputs on this analog switch ic. Operating 4 inputs is required. In 160MHz-bandwidths, data can be transferred.
MC74HC4316ANG Features
1 Channels
Switch Circuit: SPST - NO/NC
40μA Supply Current
Bandwidth: 160MHz
MC74HC4316ANG Applications
There are a lot of ON Semiconductor MC74HC4316ANG Analog Switches & Multiplexers ICs applications.
- RGB switches
- Central office
- Microprocessor Controlled Analog Systems
- ISDN NT1/TA
- Voice over IP/DSL – Integrated Access Devices, Smart
- Cable Modem
- Cellular phones
- Industrial and process control systems
- Data Acquisition Systems
- Channelized and Unchannelized DS3 applications
