banner_page

MC74HC4851ADG

400Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MC74HC4851A 16 Pins 100nA 3V 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC74HC4851ADG
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 371
  • Description: 400Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MC74HC4851A 16 Pins 100nA 3V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -55°C~125°C TA
Packaging Tube
Published 2007
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 600Ohm
Terminal Finish Tin (Sn)
Subcategory Multiplexer or Switches
Max Power Dissipation 500mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MC74HC4851A
Pin Count 16
Qualification Status Not Qualified
Number of Channels 8
Number of Circuits 1
Max Supply Voltage 6V
Min Supply Voltage 2V
Operating Supply Current 20μA
Power Dissipation 500mW
Propagation Delay 160 ns
Turn On Delay Time 260 ns
Logic Function Demultiplexer, Multiplexer
Number of Inputs 8
Halogen Free Halogen Free
Supply Type Single
Supply Current-Max (Isup) 0.04mA
Turn-Off Delay Time 260 ns
On-State Resistance (Max) 400Ohm
Multiplexer/Demultiplexer Circuit 8:1
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 40pF
On-state Resistance Match-Nom 240Ohm
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 200ns
Switch-off Time-Max 200ns
Voltage - Supply, Single (V+) 2V~6V
Signal Current-Max 0.025A
Length 9.9mm
Width 3.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MC74HC4851ADG Overview


As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. The operating temperature is extended to around -55°C~125°C TA. The total number of terminations is 16. As a result of its 8 channels, this electronic component provides high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. The multiplexer consists of 1 circuits. Try searching with MC74HC4851A to find analog multiplexer variants. This digital multiplexer has 600Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. A analog switch ic that has a cost-effective Single supply type. 2V should be the lowest voltage fed to the electronic component. An operating current of 20μA would be sufficient for this switch device. Analogue multiplexers require a 2V~6V voltage to drain from a single voltage supply. The 8 inputs need to be operated in order to work.

MC74HC4851ADG Features


8 Channels
20μA Supply Current

MC74HC4851ADG Applications


There are a lot of ON Semiconductor MC74HC4851ADG Analog Switches & Multiplexers ICs applications.

  • Imaging
  • SONET
  • New designs requiring multiplexer functions
  • Relay replacements
  • Channel Banks
  • ISDN NT1/TA
  • Communication systems
  • High-Voltage
  • E1 Multiplexer
  • Video switching

Write a review

Note: HTML is not translated!
    Bad           Good