MC74HC4851ADTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 600Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4851A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 20μA |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 260 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 260 ns |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 40pF |
| On-state Resistance Match-Nom | 240Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Switch-off Time-Max | 200ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.025A |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC4851ADTR2 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Extended operating temperature around -55°C~125°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 8 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. This electrical component is included in the 16 series of products. There are 1 circuits in this switch device. MC74HC4851A can be used to search for analog multiplexer variants. There is 600Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Analogue multiplexer with a Single supply type that is cost-effective. For this multiplexer to operate, 20μA current would be sufficient. Draining from a single voltage supply, this analog switch requires a voltage of 2V~6V. There is a voltage range of 6V operating voltages for the electrical part.
MC74HC4851ADTR2 Features
8 Channels
20μA Supply Current
MC74HC4851ADTR2 Applications
There are a lot of ON Semiconductor MC74HC4851ADTR2 Analog Switches & Multiplexers ICs applications.
- Communications systems
- Mechanical reed relay replacement
- Routers
- High speed data transmission line cards
- Channel Banks
- SONET/SDH ADM
- Private Branch Exchange (PBX)
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Battery Powered Instruments
- Power routing
