MC74HC4851ADWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 600Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4851A |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Power Dissipation | 500mW |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 260 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 260 ns |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 40pF |
| On-state Resistance Match-Nom | 240Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Switch-off Time-Max | 200ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.025A |
| Height | 2.4mm |
| Length | 10.45mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC4851ADWR2G Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.295, 7.50mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 8:1. Operation at a temperature around -55°C~125°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 8 channels. With a 3V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. A total of 1 circuits make up this switch device. MC74HC4851A can be used to search for analog multiplexer variants. It has an internal resistance of 600Ohm. The datasheets for the 16 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. A analog switch ic that has a cost-effective Single supply type. 2V should be the lowest voltage fed to the electronic component. An operating current of 20μA would be sufficient for this switch device. Draining from a single voltage supply, this analog switch requires a voltage of 2V~6V. Operating 8 inputs is required.
MC74HC4851ADWR2G Features
8 Channels
20μA Supply Current
MC74HC4851ADWR2G Applications
There are a lot of ON Semiconductor MC74HC4851ADWR2G Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- E1 Multiplexer
- Residential Gateways, Home Gateway/Router
- Automatic test equipment
- Cable PC
- Channelized and Unchannelized DS3 applications
- High-Voltage
- High reliability control systems
- Fiber to the Home
- Power routing
