MC74HC4852AD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 600Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC74HC4852A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 20μA |
| Power Dissipation | 500mW |
| Throw Configuration | 4PST |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 260 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 260 ns |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 40pF |
| On-state Resistance Match-Nom | 240Ohm |
| Switch Circuit | SP4T |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~6V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC4852AD Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 4:1. Operational temperature extended around -55°C~125°C TA. Totally, there are 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. Unlike digital switches, these are based on SP4T switching circuits. This multiplexer is composed of 2 circuits. Try searching for MC74HC4852A variants of the analog switch ic. Analog switches have 600Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 6V to a switch device. Digital switch that provides Single power at a cost-effective price. It is recommended to use 2V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 20μA. A voltage of 2V~6V is required to drain this analog switch from a single voltage supply. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. The electrical component supports 8 inputs.
MC74HC4852AD Features
4 Channels
Switch Circuit: SP4T
20μA Supply Current
MC74HC4852AD Applications
There are a lot of ON Semiconductor MC74HC4852AD Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- PBXs
- Cable PC
- Video signal routing
- Cross Connects
- Data switching
- DSUs
- High speed data transmission line cards
- Ultrasound
