MC74HC4852ADG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 20 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 600Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4852A |
| Pin Count | 16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 2μA |
| Power Dissipation | 500mW |
| Throw Configuration | 4PST |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 260 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 260 ns |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 40pF |
| On-state Resistance Match-Nom | 240Ohm |
| Switch Circuit | SP4T |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~6V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC4852ADG Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Operational temperature extended around -55°C~125°C TA. In total, there have been 16 terminations. This electronic part offers high-quality output due to its 4 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. There is an electrical component included in the 16 series. A SP4T switching circuit is used for these analog switches. A 2 circuit is present in this switch device. MC74HC4852A can be used to search for analog multiplexer variants. This digital multiplexer has 600Ohm internal resistance. Datasheets for 16 pin functions are available upon request. The analog multiplexer shown here is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. Analog switch ics with Single supply type are cost-effective. There should be 2V voltage fed to the electrical part below 2V. 20μA current would be enough for this multiplexer to operate. Using only a single voltage supply, this analog switch requires 2V~6V voltage. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board. In order to operate the 8 inputs, there are several steps to follow.
MC74HC4852ADG Features
4 Channels
Switch Circuit: SP4T
20μA Supply Current
MC74HC4852ADG Applications
There are a lot of ON Semiconductor MC74HC4852ADG Analog Switches & Multiplexers ICs applications.
- Central office
- Modems
- Multi-Line E1 Interface Cards
- Channel Banks
- Cell phones
- Fault Tolerant Systems
- ATM
- Industrial control systems
- Remote Powered Equipment
- Sample-and-hold systems
