MC74HC4852ADTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 600Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4852A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 20μA |
| Power Dissipation | 450mW |
| Throw Configuration | 4PST |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 260 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 260 ns |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 40pF |
| On-state Resistance Match-Nom | 240Ohm |
| Switch Circuit | SP4T |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~6V |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC4852ADTR2 Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 4:1. Operation at a temperature around -55°C~125°C TA. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 4 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. There is an electrical component included in the 16 series. A SP4T switching circuit is used to build these analog multiplexers. There are 2 circuits in this switch device. Try searching for the analog switch ic with MC74HC4852A if you are looking for variants. In this multiplexer, the internal resistance is 600Ohm. The datasheets for the 16 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. 2V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 20μA. Draining from a single voltage supply, this analog switch requires a voltage of 2V~6V. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. Among the inputs that can be operated are the 8 inputs.
MC74HC4852ADTR2 Features
4 Channels
Switch Circuit: SP4T
20μA Supply Current
MC74HC4852ADTR2 Applications
There are a lot of ON Semiconductor MC74HC4852ADTR2 Analog Switches & Multiplexers ICs applications.
- Battery-powered systems
- Precision test equipment
- Cross Connects
- Battery Powered Instruments
- Industrial and process control systems
- CSU
- Multiplexers
- SDH
- Access Concentrators
- Data Acquisition Systems
