MC74HC4852AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 600Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 750mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC74HC4852A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 20μA |
| Throw Configuration | 4PST |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 260 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 260 ns |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 40pF |
| On-state Resistance Match-Nom | 240Ohm |
| Switch Circuit | SP4T |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~6V |
| Height Seated (Max) | 4.44mm |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC4852AN Overview
Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tube is used. Multiplexers like this are mounted in the Through Hole position. Multiplexer and demultiplexer circuits have a number 4:1. Operating temperature extended to -55°C~125°C TA. The total number of terminations is 16. High-quality output is provided by the electronic component's 4 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 16 pins. Multiplexers built on a SP4T switching circuit are built. 2 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MC74HC4852A. An switch multiplexer with 600Ohm internal resistance has a value of 600Ohm. Datasheets for 16 pin functions are available upon request. In this analog multiplexer, the value is Multiplexer or Switches. The analog switch ic is of the Single supply type and is cost-effective. This multiplexer would work with 20μA current. An analogue multiplexer drains from a single voltage supply at 2V~6V. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board. The electrical part can be operated at 6V voltage levels.
MC74HC4852AN Features
4 Channels
Switch Circuit: SP4T
20μA Supply Current
MC74HC4852AN Applications
There are a lot of ON Semiconductor MC74HC4852AN Analog Switches & Multiplexers ICs applications.
- T1/E1 Terminals
- USB 1.1 signal switching circuits
- Multi-Line E1 Interface Cards
- Imaging
- Communications systems
- Microwave transmission systems
- Medical systems
- Audio and video switching
- Transmit
- Private Branch Exchange (PBX)
