MC74HC4852ANG
| Parameters | |
|---|---|
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 600Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexers or Switches |
| Max Power Dissipation | 750mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4852A |
| Pin Count | 16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 20μA |
| Power Dissipation | 750mW |
| Throw Configuration | 4PST |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 260 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 260 ns |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 40pF |
| On-state Resistance Match-Nom | 240Ohm |
| Switch Circuit | SP4T |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~6V |
| Height Seated (Max) | 4.44mm |
| Length | 19.175mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
MC74HC4852ANG Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. Through Hole is where this multiplexer is located. 4:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -55°C~125°C TA. In total, 16 terminations have occurred. A electrical component with 4 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. There are 16 pins injected into the electronic part body. Circuits based on SP4T switching are used to construct these analog switch ics. The circuits in this analogue multiplexer number 2. MC74HC4852A can be used to search for analog multiplexer variants. There is 600Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexers or Switches. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. The analog switch ic is of the Single supply type and is cost-effective. There should be 2V voltage fed to the electrical part below 2V. In order to operate this switch device, it would need a current of 20μA. Draining from a single voltage supply, this analog switch requires a voltage of 2V~6V. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. The 8 inputs need to be operated in order to work.
MC74HC4852ANG Features
4 Channels
Switch Circuit: SP4T
20μA Supply Current
MC74HC4852ANG Applications
There are a lot of ON Semiconductor MC74HC4852ANG Analog Switches & Multiplexers ICs applications.
- Sample hold systems
- Remote wireless modules
- HDTV
- ISDN NT1/TA
- High speed data transmission line cards
- Battery-powered systems
- Isolation
- Data switching
- Battery Powered Instruments
- SDH
