MC74HC573ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Max Supply Current | 4μA |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 26 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 45 ns |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC573ADTR2G Overview
20-TSSOP (0.173, 4.40mm Width) contains it. Tape & Reel (TR) is the packaging method. It is configured with an output of Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Surface Mount is used to mount this electronic part. With a supply voltage of 2V~6V, it operates. The operating temperature is -55°C~125°C. There are a number of FPGAs in this series, including this one. It is designed with 8 bits. This device has 20 terminations. There is no doubt that it belongs to the family 74HC573. The device works with a voltage of 3V for its supply voltage. It has 20 pins that makes it easy to use. HC/UH is the family name of this electronic device. The device has 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches includes this part. There is a maximum voltage supply (Vsup) that reaches 6V. There are 2/6V power supplies attached to it. A voltage greater than 2V must be supplied as a power supply (Vsup). Its reliable performance makes it an excellent choice for TAPE AND REEL. A binary equivalent of the input line is generated by the 3 output lines. There are no external factors that affect it, so it consumes 4μA quiescent current. The superior flexibility of the system is achieved through its use of 8 circuits.
MC74HC573ADTR2G Features
20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
MC74HC573ADTR2G Applications
There are a lot of ON Semiconductor MC74HC573ADTR2G Latches applications.
- A/D converters
- Automotive Cluster
- Bus system register with enable parallel lines at bus side
- Display driver
- Counter control
- Counters
- Timers
- Four-bit storage with output enable
- Watches
- Digital bus buffer
