MC74HC573ADWG
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 26 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 45 ns |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Height | 2.4mm |
| Length | 12.95mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2004 |
| Series | 74HC |
MC74HC573ADWG Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. Tube is the way in which it is packaged. Tri-State is the output configured for it. There is a logic type of D-Type Transparent Latch associated with this electrical device. Surface Mount is used to mount this electronic part. A 2V~6V supply voltage is required to operate it. A temperature of -55°C~125°C is set as the operating temperature. In the 74HC series, this FPGA is located. 8 Bits are used in the design of this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is no doubt that it belongs to the family 74HC573. In order to operate it, the supply voltage must be 3V. There are 20 pins on it. It is part of the family of electronic devices called HC/UH. With the design of the board, there are only 20 pins. The electronic part is mounted using the Surface Mount method. This device has 2 ports that can be connected to it. This part can be found within the FF/Latches subcategory. Vsup reaches 6V as the maximum supply voltage. A total of 2/6V power supplies are required for it to operate. Ensure that the supply voltage (Vsup) is greater than 2V. It consists of 3 input lines from which an electronic circuit can be built. Based on its reliable performance, this device is appropriate for RAIL. Its 7.8mA output current allows for maximum design flexibility. The current consumed by the device is 4μA volts in quiescent mode, which cannot be affected by external factors.
MC74HC573ADWG Features
20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
MC74HC573ADWG Applications
There are a lot of ON Semiconductor MC74HC573ADWG Latches applications.
- Parallel-to-Serial Data Conversion
- Registers
- Audio and video switching
- Data acquisition
- A/D converters
- BCD counting
- Frequency dividing
- OC-48 communication systems
- Pattern Generators
- Accumulator Registers
