Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
20-DIP (0.300, 7.62mm) |
Number of Pins |
20 |
Weight |
2.259996g |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Published |
1997 |
Series |
74HC |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Tin (Sn) |
Subcategory |
FF/Latches |
Packing Method |
RAIL |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
74HC573 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
7.8mA |
Max Supply Current |
4μA |
Number of Bits |
8 |
Propagation Delay |
30 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
26 ns |
Family |
HC/UH |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
7.8mA 7.8mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.006 A |
Prop. Delay@Nom-Sup |
45 ns |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Height |
3.556mm |
Length |
27.1526mm |
Width |
6.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
MC74HC573ANG Overview
In the package 20-DIP (0.300, 7.62mm), it can be found. Tube is the way in which it is packaged. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Through Hole, this electronic part is mounted. A voltage of 2V~6V is used as the supply voltage for this device. A temperature of -55°C~125°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. 8 Bits are used in the design of this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74HC573 family. It operates with a supply voltage of 3V. It is equipped with 20 pin count. HC/UH is the family name of this electronic device. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted using the Through Hole method. This device has 2 ports on board, which are all available at the same time. This part can be found within the FF/Latches subcategory. Vsup reaches 6V as the maximum supply voltage. 2/6V power supplies are needed to operate it. It is recommended to have a higher supply voltage (Vsup) than 2V. This device is well suited for RAIL based on its reliable performance. The 7.8mA output current gives it maximum design flexibility. 3 output lines provide binary equivalents of input lines. It consumes 4μA of quiescent current without being affected by outside factors. In order to achieve its superior flexibility, 8 circuits are used.
MC74HC573ANG Features
20-DIP (0.300, 7.62mm) package
74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
MC74HC573ANG Applications
There are a lot of ON Semiconductor MC74HC573ANG Latches applications.
- Double bus register system
- Display driver
- Buffer Storage
- Automotive HEV/EV Powertrain
- Multistage ripple counting
- Registers
- Automotive Body Electronics
- Parallel data storage
- Multi-line decoders
- Watches