MC74HC574ADWR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74HC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 27 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC574ADWR2 Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. As part of the package Tape & Reel (TR), it is embedded. The output it is configured with uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates with an input voltage of 2V~6V volts. It is operating at a temperature of -55°C~125°C TA. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74HCseries contain this type of chip. This D flip flop should not have a frequency greater than 35MHz. D latch consists of 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. There have been 20 terminations. The 74HC574 family contains this object. The power supply voltage is 3V. Its input capacitance is 10pFfarads. An electronic device belonging to the family HC/UHcan be found here. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. Flip flops designed with 8bits are used in this part. 6Vis the maximum supply voltage (Vsup). The supply voltage (Vsup) should be maintained above 2V for normal operation. Its superior flexibility is attributed to its use of 8 circuits. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. The D latch runs on a voltage of 2/6V volts. A total of 2ports are embedded in the D flip flop. To operate, the chip has a total of 3 output lines.
MC74HC574ADWR2 Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC574ADWR2 Applications
There are a lot of ON Semiconductor MC74HC574ADWR2 Flip Flops applications.
- Data transfer
- Latch-up performance
- Communications
- Automotive
- Memory
- Safety Clamp
- Supports Live Insertion
- Data storage
- Reduced system switching noise
- Clock pulse
