MC74HC574AF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 27 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC574AF Overview
The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). The package Tubecontains it. It is configured with Tri-State, Non-Invertedas an output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 2V~6Vis required for its operation. A temperature of -55°C~125°C TAis used in the operation. D-Typedescribes this flip flop. JK flip flop is a part of the 74HCseries of FPGAs. A frequency of 35MHzshould be the maximum output frequency. A total of 1 elements are present. It consumes 4μA of quiescent A total of 20 terminations have been made. You can search similar parts based on 74HC574. An input voltage of 3Vpowers the D latch. There is 10pF input capacitance for this T flip flop. HC/UHis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. A Positive Edgeclock edge trigger is used in this device. The RS flip flops belongs to FF/Latches base part number. An electronic part with 8bits has been designed. Vsup reaches 6V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be above 2V. Its flexibility is enhanced by 8 circuits. This D flip flop is well suited for RAIL based on its reliable performance. There are 2/6V power supplies attached to it. The flip flop contains 2ports. In order for the chip to function, it has 3output lines.
MC74HC574AF Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC574AF Applications
There are a lot of ON Semiconductor MC74HC574AF Flip Flops applications.
- High Performance Logic for test systems
- EMI reduction circuitry
- Shift Registers
- ESD performance
- Matched Rise and Fall
- Count Modes
- QML qualified product
- Load Control
- Individual Asynchronous Resets
- Bounce elimination switch
