MC74HC73ADG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | JK Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC73 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Clock Frequency | 35MHz |
| Turn On Delay Time | 21 ns |
| Family | HC/UH |
| Logic Function | JK-Type |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| fmax-Min | 35 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC73ADG Overview
The package is in the form of 14-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tube package. Differentialis the output configured for it. This trigger uses the value Negative Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. A temperature of -55°C~125°C TAis used in the operation. JK Typeis the type of this D latch. In FPGA terms, D flip flop is a type of 74HCseries FPGA. You should not exceed 35MHzin its output frequency. A total of 2elements are contained within it. It consumes 4μA of quiescent A total of 14terminations have been recorded. D latch belongs to the 74HC73 family. An input voltage of 4.5Vpowers the D latch. This T flip flop has a capacitance of 10pF farads at the input. HC/UHis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device has the clock edge trigger type of Negative Edge. There is a base part number FF/Latchesfor the RS flip flops. The maximal supply voltage (Vsup) reaches 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. This D flip flop is well suited for RAIL based on its reliable performance.
MC74HC73ADG Features
Tube package
74HC series
14 pins
MC74HC73ADG Applications
There are a lot of ON Semiconductor MC74HC73ADG Flip Flops applications.
- Counters
- Frequency division
- Data Synchronizers
- ESD performance
- Convert a momentary switch to a toggle switch
- Clock pulse
- Balanced 24 mA output drivers
- Data transfer
- Bounce elimination switch
- CMOS Process
