MC74HC73ADR2G
| Parameters | |
|---|---|
| Number of Terminations | 14 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC73 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 35MHz |
| Quiescent Current | 4μA |
| Turn On Delay Time | 21 ns |
| Family | HC/UH |
| Logic Function | JK-Type |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
MC74HC73ADR2G Overview
14-SOIC (0.154, 3.90mm Width)is the packaging method. As part of the package Tape & Reel (TR), it is embedded. As configured, the output uses Differential. In the configuration of the trigger, Negative Edgeis used. There is an electric part mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. In the operating environment, the temperature is -55°C~125°C TA. The type of this D latch is JK Type. In terms of FPGAs, it belongs to the 74HC series. It should not exceed 35MHzin its output frequency. A total of 14 terminations have been made. Members of the 74HC73family make up this object. Power is supplied from a voltage of 5V volts. There is 10pF input capacitance for this T flip flop. HC/UHis the family of this D flip flop. Surface Mount mounts this electronic component. There are 14pins on it. The clock edge trigger type for this device is Negative Edge. This RS flip flops is a part number FF/Latches. There is a 6Vmaximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 2V. 2 circuits are used to achieve its superior flexibility. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. There is 4μA quiescent current consumption by it.
MC74HC73ADR2G Features
Tape & Reel (TR) package
74HC series
14 pins
MC74HC73ADR2G Applications
There are a lot of ON Semiconductor MC74HC73ADR2G Flip Flops applications.
- Data transfer
- Shift Registers
- Guaranteed simultaneous switching noise level
- ESCC
- Differential Individual
- Count Modes
- Frequency division
- Set-reset capability
- Individual Asynchronous Resets
- Automotive
