MC74HC73ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC73 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Clock Frequency | 35MHz |
| Turn On Delay Time | 21 ns |
| Family | HC/UH |
| Logic Function | JK-Type |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Negative Edge |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC73ADTR2G Overview
As a result, it is packaged as 14-TSSOP (0.173, 4.40mm Width). D flip flop is included in the Tape & Reel (TR)package. T flip flop uses Differentialas its output configuration. There is a trigger configured with Negative Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. A temperature of -55°C~125°C TAis considered to be the operating temperature. The type of this D latch is JK Type. JK flip flop is a part of the 74HCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 35MHz. D latch consists of 2 elements. This process consumes 4μA quiescents. It has been determined that there have been 14 terminations. JK flip flop belongs to 74HC73 family. A voltage of 5V provides power to the D latch. This JK flip flop has a 10pFfarad input capacitance. HC/UHis the family of this D flip flop. There is an electronic component mounted in the way of Surface Mount. There are 14pins on it. The clock edge trigger type for this device is Negative Edge. This device is part of the FF/Latchesbase part number family. The maximal supply voltage (Vsup) reaches 6V. A normal operating voltage (Vsup) should remain above 2V. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL.
MC74HC73ADTR2G Features
Tape & Reel (TR) package
74HC series
14 pins
MC74HC73ADTR2G Applications
There are a lot of ON Semiconductor MC74HC73ADTR2G Flip Flops applications.
- Memory
- Single Down Count-Control Line
- Matched Rise and Fall
- Power down protection
- ATE
- Balanced Propagation Delays
- EMI reduction circuitry
- Data transfer
- Digital electronics systems
- Registers
