MC74HC74ADG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Current Rating | 4μA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 35MHz |
| Propagation Delay | 160 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 17 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 17ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC74ADG Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. You can find it in the Tubepackage. Currently, the output is configured to use Differential. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 2V~6Vvolt supply, it operates as follows. In this case, the operating temperature is -55°C~125°C TA. It belongs to the type D-Typeof flip flops. It belongs to the 74HCseries of FPGAs. It should not exceed 35MHzin terms of its output frequency. The number of terminations is 14. It is a member of the 74HC74 family. A voltage of 3V is used to power it. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the HC/UHfamily of D flip flop. It is mounted by the way of Surface Mount. This board is designed with 14pins on it. There is a clock edge trigger type of Positive Edgeon this device. The part you are looking for is included in FF/Latches. As soon as 6Vis reached, Vsup reaches its maximum value. For normal operation, the supply voltage (Vsup) should be kept above 2V. In light of its reliable performance, this T flip flop is well suited for RAIL. This T flip flop features a maximum design flexibility due to its output current of 5.2mA. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. As a result, it consumes 2μA of quiescent current without being affected by external factors. 2is the number of channels.
MC74HC74ADG Features
Tube package
74HC series
14 pins
MC74HC74ADG Applications
There are a lot of ON Semiconductor MC74HC74ADG Flip Flops applications.
- Buffered Clock
- Storage registers
- Instrumentation
- Frequency Dividers
- Computers
- Data Synchronizers
- ESCC
- Individual Asynchronous Resets
- Frequency Divider circuits
- Control circuits
