MC74HC74AFELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 35MHz |
| Propagation Delay | 100 ns |
| Turn On Delay Time | 17 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 17ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74HC74AFELG Overview
It is packaged in the way of 14-SOIC (0.209, 5.30mm Width). As part of the package Tape & Reel (TR), it is embedded. Currently, the output is configured to use Differential. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. A temperature of -55°C~125°C TAis used in the operation. Logic flip flops of this type are classified as D-Type. This type of FPGA is a part of the 74HC series. A frequency of 35MHzshould be the maximum output frequency. There is a consumption of 2μAof quiescent energy. It has been determined that there have been 14 terminations. The 74HC74family includes it. It is powered by a voltage of 3V . A 10pFfarad input capacitance is provided by this T flip flop. Devices in the HC/UHfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. There is a FF/Latchesbase part number assigned to the RS flip flops. It reaches 6Vwhen the supply voltage is maximal (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 2V. Using 2 circuits, it is highly flexible. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. There are no output lines on the JK flip flop.
MC74HC74AFELG Features
Tape & Reel (TR) package
74HC series
14 pins
MC74HC74AFELG Applications
There are a lot of ON Semiconductor MC74HC74AFELG Flip Flops applications.
- Common Clocks
- Load Control
- Balanced 24 mA output drivers
- Single Down Count-Control Line
- Convert a momentary switch to a toggle switch
- Data Synchronizers
- Buffered Clock
- Single Up Count-Control Line
- Latch-up performance
- Test & Measurement
